772-692-5505

Bafang display error codes

Bafang error 33
Brake signal error

The switch that cuts the motor when you brake is sending a faulty signal. Check the brakes themselves work normally before riding.

Checked against Bafang's own manual: October 23, 2026.

Check your display first. These are the codes Bafang's own displays use. Many bikes with Bafang or Bafang-style motors have a display made by another company, and its numbers can mean something different. If your display isn't a Bafang one, use that display's manual, or send us a photo.

What Bafang says

The brake signal has an error (only on bikes with brake sensors).

Bafang's recommended steps

  1. Squeeze and release both brake levers firmly and check they spring back fully.
  2. If the problem continues, contact your retailer or a shop that works on Bafang systems.

Summarized from Bafang DP E180/E181 dealer manual (error 33), checked October 23, 2026. Follow the link for Bafang's exact wording.

If it keeps coming back

If the code comes back after a restart, have it checked by a mechanic who works on Bafang systems. Bikes Plus works on Bafang and Bafang-style systems all the time.

Write down the code and what you were doing when it appeared. That saves time at the shop.

Call Bikes Plus Email a photo

Make sure it's a Bafang code

Error numbers mean different things on different systems. This page covers bikes with a Bafang display (the Bafang name or logo is usually on the display or its back), on Bafang mid-drive and hub-motor systems. Displays with a screen keep the last 10 codes in the INFO or ERROR menu. LED-only displays flash the code: the first light flashes the tens digit and the second the units, so two flashes then five is 25.

All Bafang codes Step-by-step checks